Aiwa VX-S205U manual L.012345Em, Various search functions, To search the next index signal, L. km

Various search functions

		TV VCR/CATV
	—	Number
INDEX —-		buttons (1-9)
	—	CALL
RESET —-
ZERO- ----
RETURN
NW REWl@ —–	—	-F FWDl@
	—-E STOP

1 Press CALL to display the tape counter.

L===l

L.0123:45Em

SP

2Press RESET at the point you want to locate later. The tape counter resets to “00:00.”

w

10:3OAM SUN CH 023

L. km

00:00:00 SP

3After playback or recording, press ❑ STOP, then ;~ER().RETURN,

The tape automatically stops when the tape counter returns to about “00:00.”

●When you insert a cassette, the tape counter is reset to

“00:00:00.”

●The tape counter does not work while playing unrecorded portions of tape.

The unit automatically marks an index signal on the tape each time recording starts. You can use these signals to find the beginning of any recording.

Before starting

Set the TV VCR/CATV selector to TV VCR.

1 Press INDEX during stop or playback.

2! Press the number buttams(l -9) to select the index number (up to 9).

.1/ IN DE X73,:

[ <1-91-+4Jb/lNDEX>

3Press > F FW[) (for succeeding programs) or 4-4 REW (for preceding programs).

The unit starts searching!.

Playback starts automahcally from the beginning c)fthe specified recording.

To search the next index signal

Press INDEX during stop or playback, then press *-

F FWD or - REW. When the next index signal is found, playback starts automatically.

●Index signals should be at least 2 minutes apart. Otherwise,

the unit cannot detect them properly.

. Index signals may not be cjetected on damaged or worn out tapes.

●Index signal at the beginning of a recorded tape may [notbe detected.

●Index signal may not be detected if it is extremely close to the point where the search began.

ENGLISH 2:2