Aiwa VX-S205U az%?s, To cancel a program, If the program overlaps another, r7inia, Press ENTER

3 Press SET/TRACl<lNG +/-to select ONCE, DAILY or WEEKL,Y.

To record	Select
a single program	ONCE
daily program	DAILY
	(See right)
weekly program such as every	WEEKLY
Monday (WKL-MOIN)

4 Press ENTER.

●The following tirmer information appears on the screen.

●If you want to change the setting here, see on the right.

PLUSCODE	123------
	\l;\\/
DATE	–2l(MON)-
START	z b:3d PM~
END	7:OOPM
CH	023
SPEED	SP

<+1-l ENTER lcANcIzLIMENu>

5 Press ENTER repeatedly until the tape speed

flashes, then press SET/TRACKING +/- to select SP, LP or !3LP.

r7inia

I

<+/-/ ENTER jCANCI:LIMENU>

L.1

6 Press VCR PLUS+.

The timer program Iiet appears.

--

--

<+/-/ ENTECANCI:L:fWW J>J>

L.

7 Press MENU twice to return to the normal screen.

8 Press T-REC.

oThe TIMER REC irldicator on the unit lights, and the unit stands by for timer recording.

o If the TIMER REC indicator does not light, a cassette is not inserted.

oThe cassette is ejected if the cassette’s erasure prevention tab has been removed.

o You can turn the unit off. The unit automatically starts recording at the programmed time.

When the TIMER REC indicator on the unit lights, the tape functions are not operable. To operate the others, press T-REC. However, remember to press it again to activate timer recordings.

To cancel a program

Select TIMER REC SET in the menu. Then press SET/ l-RACKING +/– to select the unnecessary program, and press CANCEL.

If the program overlaps another

The overlapped portions will be deleted. The program Iistecl first on the timer program setting screen has priority c~ver the succeeding program as illustrated.

8

Program 2 -

Program 1 - ‘“+00

Program 3 +

Actual recorded potiions

Prog.1Prog.2Prog.3

●If “PROGRAMFULL flashes and the timer program list on step 1, 8 programs are already set, Cancel an unnecessary program.

oTo confirm the setting, select TIMER REC SET in the menu to display the timer program list. Press MENU twice tc) return to the normal screen.

. When the power supply is interrupted for more than 5 seconds, the preset program is cleared. In this case, you have to set the clock and the timer again.

az%?s

During timer recording, when the tape reaches the end, the TIMER REC indicator on the unit flashes.

To set the daily program

In step 4, press SET/TRACKING+/– repeatedly to display the desired daily program as follow:

MON-FRI : Monday to Friday

MON-SAT : Monday to Saturday

SUN - SAT: Everyday

I SPEED SP I

To extend the recording time

After step 4, press ENTER repeatedly until the end time flashes, then press SET/TRACKING +/– to change the setting.

ENGLISH 26