MULTI JOG

\

.—

I !,–-’1

 

The unit can store a total of 32 preset stations. When a station is stored, a preset number is assigned to the station. Use the preset number to tune in to a preset station directly.

7 Press TUNER/BAND to select a band, and press-DOWN or -UP to select a station.2Press 1I SET to store the station.

A preset number beginning from 1 in consecutive order for each band is assigned to the station.

Frequency Preset number

3Repeat steps 1 and 2.

No more stations will be stored if a total of 32 preset stations have already been stored.

“FULL” is displayed if you attempt to store more than 32 preset

stat ions.

PRESET NUMBER TUNING

Use the remote control to select the preset number directly.

1 Press BAND while pressing SHIFT to select a band.2Press numbered buttons O-9 and +1 O to select a preset number.

Example:

To select preset number 20, press +10, +10 and O.

To select preset number 15, press +10 and 5.

Selecting a preset number on the main unit

Press TUNER/BAND to select a band. Press TUNER PRESET repeatedly until the preset number flashes (preset tuning mode), and turn MULTI JOG. The preset numbers are selected in

sequence as you turn MULTI JOG.

●>P13ESET is also available to select the preset number. Each time the button is pressed, the next highest number is selected.

To clear a preset station

Select the preset number of the station to be cleared with the numbered buttons. Then, press ■ CLEAR, and press 1I SET within 4 seconds.

The preset numbers of all other stations in the band with higher numbers are decreased by one.

i,~

‘... --.----2

(Deck 1)

(Deck 2)

Usable tapes

Use Type I (normal) tapes only.

1 PressTAPE, then press WA to open the cassette holder.
■ /A

...

Insert a tape with the exposed side down. Push the cassette holder to close.

2 Press - to start Dlaw

Only the side facing o..df;om the unit can be played back.

To stop play, press W=.

To pause play, press 1I. To resume play, press again.

To fast forward or rewind, press + or - in stop mode. Then press WA to stop the tape.

When both Deck 1 and Deck 2 are set in the playback mode

Deck 2 is heard.