Aiwa Z-L31 manual Press E, To rXav one disc only, press one of Disc Direct Play 1

MULTI JOG		CD EDIT/CHECK
	\	r —	ml. .

Press CD, then press A OPEN/CLOSE to open the disc compartment. Load disc(s) with the label side up.

To load one or two discs, place the disc(s) on the tray(s) in the direction of the arrows as illustrated.

Tray number

DISC CHANGE

To load three to five discs, press DISC CHANGE to rotate the trays after placing two discs. Place the next disc on empty tray. Each time DISC CHANGE is pressed, the trays rotate and one disc can be placed.

After placing the discs, press AOPEN/CLOSE to close the disc compartment.

The display shows the information of the disc to be played.

Tray number of the

disc to be played Total playing time

Total ;umber of tracks

Load discs.
~,	press E.
Play begins with the disc on tray 1.
Number of track being played	Elapsed playing time

To rXav one disc only, press one of DISC DIRECT PLAY 1- 5.

The selected disc is played once.

Selected disc tray, number Elapsed playing time

Number of track being played

To stop play, press ■ .

To pause play, press II. To resume play, press again.

To search for a particular point during playback, keep +

or - pressed and release the button at the desired point.

To skip to the beginning of a track during playback, turn MULTI JOG or press + or > repeatedly.

To remove discs, press AOPEN/CLOSE.

~discs that face you. When the disc(s) to be removed does(do) not face you, press DISC CHANGE repeatedly.

To start play when the power is off (Direct Play Function) Press CD. The power is turned on and play of the loaded disc(s) begins.

When AOPEN/CLOSE is pressed, the power is also turned on and the disc compartment is opened.

To check the remaining time

During play, press CD EDIT/CHECK on the remote control while pressing SHIFT. The amount of time remaining until all tracks finish playing is displayed. To restore the playing time display, repeat the above.

Selecting a track with the remote control

1Press one of DISC DIRECT PLAY 1-5 to select a disc.

To select disc 4 or 5, press DISC DIRECT PLAY 4 or 5 while

pressing SHIFT.

2Press numbered buttons O-9 and +1O to select a track. Example:

To select the 25th track, press +1O, +1O and 5. To select the 10th track, press +10 and O.

The selected track starts to play and continues to the end of that disc.

Replacing discs during play

While one disc is playing, the other discs can be replaced without interrupting play.

1Press DISC CHANGE.

Two discs can be replaced.

2Remove the discs and replace with other discs.

To replace the other two discs, press DISC CHANGE again.

3 Press AOPEN/CLOSE to close the disc compartment.

12 ENGL/SH