Aiwa Z-L31 manual Press one of Disc Direct Play 1-5 to select a disc

Up to 30 tracks can be programmed from any of the inserted discs.

.,

U

Use the remote control.

1 Press PRGM while pressing SHIFT in stop mode. “--”is displayed

2 Press one of DISC DIRECT PLAY 1-5 to select a disc.

To select disc 4 or 5, press DISC DIRECT PLAY 4 or 5 while pressing SHIFT.

Go to the next step when the tray stops rotating.

3Press numbered buttons O-9 and +1 O to program a track.

Example:

To select the 25th track, press +1O, +1O and 5. To select the 10th track, press +1O and O.

Selected track number Total number of selected tracks

Program number	1
	Total playing time of the
	selected tracks

4Repeat steps 2 and 3 to program other tracks.

5Press -to start play.

To check the program

Each time + or - is pressed in stop mode, a disc number, track number, and program number will be displayed.

To clear the program

Press ■ CLEAR in stop mode.

To add tracks to the program

Repeat steps 2 and 3 in stop mode. The track will be programmed after the last track.

To change the programmed tracks

Clear the program and repeat all the steps again.

To play the programmed tracks repeatedly

After programming the tracks, press RANDOM/REPEAT repeatedly while pressing SHIFT until CL appears on the display.

●During programmed play, you can not use random play, check the remaining time or select a track.

●“FULL”is displayed if you attempt to program more than 30 tracks.

14ENGLISH