Aiwa Z-R555 manual 4,5 3,7,8,9, Press EDIT/CHECK twice while pressing SHIFT on the remote control

Models: Z-R555

1 62
Download 62 pages 38.81 Kb
Page 14
Image 14
4,5

5

4,5

3,7,8,9

In the Programmed edit recording function the tracks can be programmed while checking the remaining time on each side of the tape as the tracks are programmed.

1 Insert the tape into Deck 1.

Insert the tape with the side to be recorded on first facing out from the unit, and wind up the tape with +.

2Press CD and load the disc(s).

3Press EDIT/CHECK twice while pressing SHIFT

on the remote control.

“EDIT and “PRGM” are displayed.

When “Al” is displayed, press EDIT/CHECK while pressing SHIFT again.

4 Press numbered buttons on the remote control to designate the tape length.

10 to 99 minutes can be specified.

-, - or MULTI JOG are also available to designate the tape length.

 

Tape side A Maximum recording

Tape length

(front side)

time for side A

5 Press one of DISC DIRECT PLAY 1-5 to select a disc.

Then, press numbered buttons O-9 and +1 O on the remote control to program a track.

To select disc 4 or 5 from the remote control, press DISC DIRECT PLAY 4 or 5 while pressing SHIFT.

Example: To select the 10th track of disc 2, press DISC

DIRECT PLAY 2, then press +10 and O.

Selected

disc

 

number

Program number

Remaining time on side A

I

 

I

Selected track number

Programmed tracks number

6 Repeat step 5 for the rest of the tracks for side A.

A track whose playing time is longer than the remaining time cannot be programmed.

7 Press EDIT/CHECK while pressing SHIFT on the remote control to select side B and program the tracks for side B.

Tape side B (reverse side)

I

8 Press EDIT/CHECK while pressing SHIFT to select side A and press on Deck 1.

~flashes for 10 seconds, and then CD play and recording

of edited tracks for the first side start simultaneously. When the end of the tape is reached, Deck 1 enters the recording stop mode. After entering the recording stop mode, go to step 9.

9 Press EDIT/CHECK while pressing SHIFT on the remote control for recording of the second side.

“B is displayed.

10 Turn over the tape in Deck 1 and press to start recording.

Recording starts.

To stop recording

Press WA on Deck 1. Recording and CD play stop simultaneously.

To check the order of the programmed track numbers

Before recording, press EDIT/CHECK while pressing SHIFT on

the remote control to select side A or B, and press + or ~ repeatedly.

Disc number Program number

Track number Programmed track numbers

To change the program of each side

Press EDIT/CHECK while pressing SHIFT on the remote control to select side A or B, and press CLEAR to clear the program on the selected side. Then program tracks again.

To clear the edit program

Press CLEAR twice in stop mode so that “EDIT” disappears

on the display.

13 ENGLISH

Page 14
Image 14
Aiwa Z-R555 4,5 3,7,8,9, Press EDIT/CHECK twice while pressing SHIFT on the remote control, Insert the tape into Deck