Aiwa Z-R555 COnneCting AN OuTDOOR AN’TIiiiiii, To stand the AM antenna on a surface, page

To position the antennas

FM feeder antenna:

Extend the antenna horizontally in a T-shape and fix its ends to

the wall.

AM antenna:

Position to find the best reception.

To stand the AM antenna on a surface

Fix the claw to the slot.

. ,

●Be sure to connect the speaker cords correctly. Improper connections can cause short circuits in SPEAKERS terminals.

●Do not leave objects generating magnetism, such as credit cards, near the speakers, as the objects may be damaged.

●Do not position the FM antenna near metal objects or curtain rails,

●Do not position the AM antenna near other optional equipment, the stereo system itself, the AC cord or speaker cords, as interference will occur.

●Do not unwind the AM antenna wire.

, -i .. . ...... .. ,*,= :,.7, .,.!! . --- A, ,,,, ,-

COnneCting AN OuTDOOR AN’TIiiiiii

For better FM reception, use of an outdoor antenna is

recommended.

Connect the outdoor antenna to FM 75 Q terminals.

Inserting batteries

Detach the battery cover on the rear of the remote control and insert two R6 (size AA) batteries,

R6(AA)

When to replace the batteries

The maximum operational distance between the remote control and the sensor on the main unit should be approximately 5 meters (16 feet), When this distance decreases, replace the batteries with new ones.

To use SHIFT on the remote control

Buttons @) have two different functions. One of these functions is indicated on the button, and the other on the plate above the button,

To use the function on the button, simply press the button.

To use the function on the plate above the button, press the button while pressing SHIFT.

To use FUNCTION on the remote control

FUNCTION substitutes for the function buttons (TAPE, TUNER/

BAND, VIDEO/AUX/PHONO, CD) on the main unit.

Each time FUNCTION is pressed, the next function is selected cyclically.

0

SH

FU

●If the remote control is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage.

●The remote control may not operate correctly when:

-The line of sight between the remote control and the remote sensor inside the display window is exposed to intense light, such as direct sunlight

-Other remote controls are used nearby (those of a television, etc.)

I To connect other optional equipment+ page 16. I

ENGLISH 4