IP Router Configuration
7750 SR OS Router Configuration Guide Page 143
===============================================================================
Policy Description
-------------------------------------------------------------------------------
fromStatic
-------------------------------------------------------------------------------
Policies : 1
===============================================================================
B:CORE2#
route-table
Syntax route-table [family] [ip-prefix[/prefix-length] [longer | exact] ] | [protocol protocol-name] |
[summary]
Context show>router
Description This command displays the active routes in the routing table.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters family — Specify the type of routing information to be distributed by this peer group.
Values ipv4 — Displays only those BGP peers that have the IPv4 family enabled and not
those capable of exchanging IP-VPN routes.
ipv6 — Displays the BGP peers that are IPv6 capable.
mcast-ipv4 — Displays the BGP peers that are IPv4 multicast capable.
ip-prefix[/prefix-length] — Displays routes only matching the specified ip-address and length.
Values ipv4-prefix: a.b.c.d (host bits must be set to 0)
ipv4-prefix-length: 0 — 32
ipv6 ipv6-prefix[/pref*: x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
prefix-length: 1 — 128ipv6
longer — Displays routes matching the ip-prefix/mask and routes with longer masks.
exact — Displays the exact route matching the ip-prefix/mask masks.
protocol protocol-name — Displays routes learned from the specified protocol.
Values bgp, bgp-vpn, isis, local, ospf, rip, static, aggregate, ospf3
summary — Displays a route table summary information.
Output Standard Route Table Output — The following table describes the standard output fields for the
route table.
Label Description
Dest Address The route destination address and mask.
Next Hop The next hop IP address for the route destination.