Filter Policies
7750 SR OS Router Configuration Guide Page 409
Sample Output
A:ALA-48# show filter ipv6 100
===============================================================================
Match action Default — The filter does not have an explicit forward or drop
match action specified. If the filter entry ID indicates the entry is
(Inactive), then the filter entry is incomplete as no action has been
specified.
Drop — Drop packets matching the filter entry.
Forward — The explicit action to perform is forwarding of the
packet. If the action is Forward, then if configured the nexthop infor-
mation should be displayed, including Nexthop: <IP address>, Indi-
rect: <IP address> or Interface: <IP interface name>.
Forward - indirect: ip-addr
Forward - interface: ip-int-name
Forward - next-hop: ip-addr
Ing. Matches The number of ingress filter matches/hits for the filter entry.
Src. Port The source TCP or UDP port number or port range.
Dest. Port The destination TCP or UDP port number or port range.
Dscp The DiffServ Code Point (DSCP) name.
ICMP Code The ICMP code field in the ICMP header of an IP packet.
Option-present Off — Specifies not to search for packets that contain the option field
or have an option field of zero.
On — Matches packets that contain the option field or have an option
field of zero be used as IP filter match criteria.
Int. Sampling Off — Interface traffic sampling is disabled.
On — Interface traffic sampling is enabled.
Multiple Option Off — The option fields are not checked.
On — Packets containing one or more option fields in the IP header
will be used as IP filter match criteria.
TCP-ack Off — No matching of the ACK bit.
On — Matches the ACK bit being set or reset in the control bits of the
TCP header of an IP packet.
Egr. Matches The number of egress filter matches/hits for the filter entry.
Label Description (Continued)