Connecting Your Pocket PC
NOTE: If a Quickstart installation memory card was included with your purchase of CoPilot, you do not need to do this.
In order to successfully transfer data from your desktop to your Pocket PC, you must have Microsoft ActiveSync 3.1 (or later) installed. This software is necessary to connect the two machines and is provided by your Pocket PC manufacturer. If you did not receive this software with your mobile device, contact the distributor immediately.
1. When connecting your Pocket PC, if you have not set up a partnership between your Pocket PC and your desktop, you will be prompted to do so. This is not required. If you choose not to set up a partnership, select Guest
partnership, and you will be logged in as a Guest and ready to transfer data between machines.
2.If you have set up a partnership in the past, or choose to do so at this point, be sure to allow your Pocket PC to synchronize with your desktop/laptop prior to launching CoPilot.
NOTE: If your desktop/laptop |
|
computer does not seem to be |
|
recognizing the connection with |
|
your Pocket PC, select Connection |
|
Settings... from the |
|
File menu, and make sure you're |
|
connected using the appropriate |
|
Port. Then click Get Connected... |
|
in the File menu and follow the on- |
|
screen instructions. | - 4 - |
|
Uninstalling a Previous Version
If you have a previous version of CoPilot installed, uninstalling before you install a newer version is optional.
NOTE: If you’re uninstalling CoPilot from a Pocket device and installing the same version on another device, you must deactivate the software on the first device before installing it again.
When uninstalling CoPilot, your GPS receiver cannot be attached.
Before uninstalling, you must disconnect the receiver and perform a soft restart. Then follow the steps outlined below:
(1)On your Pocket PC:
NOTE: It is recommended to perform a soft reset on your Pocket PC before and after uninstalling CoPilot.
1.Tap the Start menu and select Settings > System > Remove Programs
2.Select the CoPilot application and tap Remove.
3.Select Pocket Speech and tap Remove.
4a. If you stored map data on a storage card:
i.Delete the CoPilot folder on the storage card. Tap Start, then Programs
>File Explorer > My Device > SD Card, then tap and hold on the CoPilot folder and select Delete from the menu.
4b. If you stored map data on your device memory:
i.Delete the CoPilot folder on My Device. Tap Start, then Programs > File Explorer > My Device, then tap and hold on CoPilot and select Delete from the menu.
(2)On your Desktop/Laptop computer:
1.Select Start menu > Settings > Control Panel.
2.Double-click Add/Remove Programs.
3.Select the CoPilot application and click on the Remove button.
4.If asked to confirm the removal of CoPilot and all of its components, select Yes.
5.If asked to remove shared files during the uninstall process, select No To All.
6.Select Start > Search > Files or Folders and find the CoPilot folder.
7.
