Cod. G522433
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 00/0510
Transportation and location 13
To access these fastening points: Detach the two small
covers located in the top covers, front and centre part of
the washer. The transport handles are visible and
accessible.
ONCE THIS OPERATION IS OVER, REPLACE AND
LOCK THE COVERS CORRECTLY.
When there is no possible way to lift the machines in place
by a crane, they must be moved by forklifts or by means of
metallic rollers placed in the base of the washer (attention
to the weight of the washers). The length of these rollers
must be 200mm (8 inch) bigger than the base of the
washer.
2.2. Releasing the security lock
In order to open the door in case of a power supply failure, completely
insert a 7/64 inch (3mm) bar through the hole located on underside of
the safety lock cover and at the same time turn the handle downwards.
(fig.6).
fig 6
DANGER!
MANUAL OPENING OF THE SAFETY LOCK MUST ONLY BE
USED BEFORE THE START-UP OF THE WASHER.
ONCE THE WASHER IS IN SERVICE, NEVER USE THE
MANUAL OPENING OF THE LOCK AS A USUAL WAY TO
OPEN THE DOOR.
fig. 5