Alliance Laundry Systems SVN255P, UVN255P IMPORTANT INSTRUCTIONS FOR USE AND CONSERVATION

Cod. G522433

Safety Instructions 5

IMPORTANT INSTRUCTIONS FOR USE AND CONSERVATION

1. EXPECTED MACHINE USE AND DON’TS. This machine has been made and designed for industrial

washing or cleansing in a water bath of linen and textile materials only. Linen and textile materials must

be free from solvent impregnation or explosives. Any other use will be considered contraindicated

without the written authorization of the manufacturer.

Under-loading as well as overloading is not recommended. Always endeavour to meet the capacity of

the machine.

It is not recommended to wash the linen inside bags. Should it be necessary, load the machine up to its

nominal value.

It is not recommended to spin carpeting, canvas or waterproof fabrics.

2. Machine MATERIALS in contact with wash products are:

 Stainless Steel AISI-304 L

 EPOXY coating on steel (in some models)

 Polypropylene PP

 EPDM and NBR

 Borosilicate glass

3. The user must inquire the chemical product supplier about the risks of chemicals and its combination.

The user is responsible to assure that products ARE COMPATIBLE and will not produce machine

oxidation or damage either to people or to the washer.

Notice that the hypochlorite (bleach), in certain conditions of use, generates chlorine gas.

Chlorine is a corrosive and oxidizing substance that, in high concentrations and temperature,

deteriorates the stainless steel and elastomers.

There are other highly oxidizing agents, such as the ozone, that can have the same effect.

4. Periodically CLEAN the machine. You will prevent metallic parts corrosion and produce higher output

and have a longer life. To clean the washing machine, use water and detergent, rinse with a damp cloth,

and dry. Cleaning with water jets or pressurised steam is forbidden.

5. Once the wash cycle has finished, THE WASHER DOOR MUST REMAIN OPEN.

 This allows for the ventilation of th e washer interior

 Avoids the appearance of harmful micro organisms.

 This extends the lifetime of the door latch.

6. NEVER use harsh products to clean the machine and laundry room. There are products on the market,

which are highly corrosive.

7. If machine is left idle for long periods of time, it must be PROTECTED from humidity and temperature

variations.

8. FOLLOW the fabric care instructions supplied by the manufacturer, THE MANUFACTURER REFUSES

ANY RESPONSIBILITY IN CASE OF TEXTILE WEAR AND TEAR.

9. Failure due to improper machine oper ation may VOID WARRANTY.

10. Replacing any part of th e washer can affect the machine’s safety.

Examples:

 A screw or bolt of insufficient strength could cause dangerous damage.

 A heater without an internal fuse co uld provoke a fire.

 An inadequate clamp can be the cause of water leaks and short circuits... etc.

The reason for which ONLY ORIGINAL SPARE PARTS MUST BE USED.

Failure to take heed of this precaution may result in a washer breakdown, a serious accident, and loss

of guarantee.

11. When asking for information on your machine, MENTION model and seri al numbe r (SERIAL PLATE is

located at the rear side. Refer to fig. 2).

12. THE ELECTRICAL DIAGRAM IS LOCATED IN THE UNDERSIDE OF THE WASHER’S TOP COVER.