Cod. G522433
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 00/0510
Transportation and location 16
2.5. Removal of shipping braces
THIS OPERATION MUST BE CARRIED OUT BY THE AUTHORIZED TECHNICAL SERVICE.
DO NOT REMOVE THE SHIPPING RESTRAINTS BEFORE PLACING THE WASHER IN ITS DEFINITIVE
POSITION.
NEVER START THE MACHINE UP WITHOUT FIRST REMOVING THE SHIPPING RESTRAINTS.
INCOMPLIANCE WITH THIS WARNING MAY CAUSE SERIOUS PHYSICAL DAMAGES TO PEOPLE AND
IRREPARABLE DAMAGE TO THE WASHER. THE WARRANTY DOS NOT COVER THIS INCIDENCE.
TILT MODELS
THE TILT SYSTEM ACCESSORIES MUST BE INSTALLED AFTER HAVING REMOVED THE WASHER
COVERS AND BEFORE REMOVING THE TRANSPORT RESTRAINTS (Refer to chapter 4)
ONCE THE TRANSPORT RESTRAINTS ARE REMOVED, REPLACE AND PROPERLY LOCKED ALL
WASHER COVERS. NEVER START THE MACHINE UP OR USE IT UNTIL ALL THE COVERS HAVE
BEEN REPLACED AND PROPERLY LOCKED.
Remove the screws securing the side guards at the top.
Loosen the screws holding the lower guard and separate
them from the machine (fig. 8/A,B).
fig. 8
Locate the four yellow fixing angles (fig. 9
/
A) and
disassemble them.
(In order to avoid the movement of the floating chassis
during transport, the 8 fixing screws are firmly tightened.
Use appropriate tools)
fig. 9