Operation

Located to the left of the computer keyboard are 20 LED indicator lights for the computer outputs. During the time that a cycle is running, one or more of these lights will be on to indicate the outputs activated for a particular step. See Figure 5.

Program

High Level

Medium Level

Door Lock Mode

Fill Indicator

Fill Indicator

Switch

 

Low Level

 

 

Balance Sensing

 

Fill Indicator

Indicator

 

 

MC008G

Figure 5

Start-up

Turn on the main power source (circuit breaker or cutoff switch on the wall).

When AC power is turned on, the display will show the program (ROM) identification code.

This identification code will appear for approximately five seconds. Then the computer display will flash “POWER” and “WAIT” alternately for 30 seconds.

The display will then show “NEXT00” to indicate that a cycle can be selected. This display will be shown at all times that power is on between cycles, indicating that the door-unlock solenoid will function if the door- unlock button is pressed. The washer-extractor is then ready for loading and unloading.

18

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F232090