Alliance Laundry Systems UW35P2, UW35P3, UW60P2, UW60P3 Clear, Drain, Drain, Enter, Enter, on red, Red Keys, Add Step, Add Step, Auxiliary, Auxiliary, Edit Cycle, Edit Cycle, No Reverse, No Reverse, Description

	Programming
	Programming Keypad (Continued)
Red Keys	Description
Edit Cycle	Edit Cycle is pressed followed by a two-digit cycle code number to display the steps of a
	preprogrammed cycle. The cycle may be altered during the edit cycle procedure by deleting,
	changing, or adding steps.
Add Step	Add Step is pressed to add a step to an existing cycle during the edit cycle procedure.
Clear (black	Clear is pressed when an error has been made in programming a step. Instead of pressing Enter as the
on red	step is completed, press Clear to eliminate the incorrect information. (Clear should never be pressed
background)	when displaying a cycle unless a particular step is to be eliminated or changed. See
	Displaying a Cycle in Memory.)
Drain	Drain is pressed after a wash, dilution rinse, or soak step is programmed in order to remove water
	from the machine. A time must be assigned that will allow the machine to reach empty. If the
	computer has been prompted for two drains, press key 1 or key 2 for the desired drain valve. See
	Prompting the WE-6.
Auxiliary	Auxiliary is pressed to activate the buzzer or other auxiliary output.
No Reverse	No Reverse is used to rotate the basket in one direction only during a step and should be pressed just
	before pressing the Enter key.
Enter	Enter is pressed to enter programming information into the computer’s memory.

F232090 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 25