Cycle Programming
Displaying a Cycle in Memory
1.Insert key into the program mode switch (located on the left side of the control module) and turn key to the PROGRAM position. The display will read “CYC00.”
2.Press the Edit Cycle key on the keypad. The display will read “DCYC00.”
3.Press the
4.Press the Enter key. The computer will search for cycle information for this cycle number.
If no cycle information exists, the computer will flash “NCYC25” followed by “ADD?” To add this cycle, press the Enter key and proceed to the add cycle programming mode. If adding this cycle is not desired, press the Clear key, and the computer will then return to the normal programming mode.
5.If cycle information does exist for cycle 25, the computer will display “0425,” for example, to indicate that cycle 25 has been run four times. To clear the count (reset it to zero), press key 0. The display will then show “0025.”
If clearing the count is not necessary or if it has just been cleared, press the Enter key. The computer will now display “HL0125,” indicating the first step of cycle 25.
6.Press the Advance key to move to the next step of the cycle. To access further information pertaining to each step (for example, temperature and/or time), press the Enter key. If the display shows a temperature, press the Enter key again to display the time. Press the Enter key once more to advance to the next step.
7.At the end of the cycle, the computer will display
8.Return the program mode switch to the RUN position and remove the key.
NOTE: Never press the Clear key while displaying a cycle in memory except to edit or delete a step.
Programming
Displaying Individual Cycle Usage
1.Insert key into the program mode switch (located on the left side of the control module) and turn key to the PROGRAM position. The display will read “CYC00.”
2.Press the Edit Cycle key on the keypad. The display will read “DCYC00.”
3.Press the
4.Press the Enter key. The display will show “xx25.” (The “xx” here stands for the number of times cycle 25 has been run and will be represented by numbers in the actual display.)
The computer will remain in this step until one of the following options has been chosen:
●Press the Enter key to continue displaying the cycle, OR
●Press the Clear key to return to the normal program mode, OR
●Press key 0 to reset the counter for this cycle to zero, OR
●Take the computer out of the program mode.
F232090 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 31 |