2 | Patch Release Note |
Some of the issues addressed in this Release Note include a level number. This number reflects the importance of the issue that has been resolved. The levels are:
Level 1 This issue will cause significant interruption to network services, and there is no
Level 2 This issue will cause interruption to network service, however there is a
Level 3 This issue will seldom appear, and will cause minor inconvenience.
Level 4 This issue represents a cosmetic change and does not affect network operation.
Features in 86251-05
Patch
PCR: 02583 | Module: FIREWALL | Level: 2 |
UDP packets passed through the firewall by a reverse enhanced NAT rule were getting an incorrect IP checksum. This caused IP to discard the packets. This issue has been resolved.
PCR: 03059 | Module: FIREWALL | Level: 2 |
SMTP proxy was falsely detecting third party relay under some |
| |
circumstances. This issue has been resolved. |
| |
PCR: 03095 | Module: DHCP | Level: 2 |
DHCP policies are no longer stored in alphabetical order in the DYNAMIC
CONFIGURATION script because this did not work when the DHCP
INHERIT parameter was used.
PCR: 03148 | Module: IPG | Level: 3 |
If the Gratuitous ARP feature was enabled on an IP interface, and an ARP packet arrived, (either ARP request, or reply) that had a Target IP address that was equal to the SenderIP address, then the ARP cache was not updated with the ARP packet’s source data. This issue has been resolved.
PCR: 03177 | Module: IPG | Level: 3 |
Deleting an IP MVR group range would only delete the last IP address of the range from the multicast table, not the entire range. This issue has been resolved.
PCR: 03199 | Module: IPV6 | Level: 3 |
RIPng was receiving invalid routes and packets. This issue has been resolved.
PCR: 03241 | Module: FIREWALL | Level: 3 |
When deleting a list associated with a policy, all rules were being deleted.
Now only the rules associated with the policy and list are deleted.
Patch
