Patch | 7 |
PCR: 03473 | Module: PIM, PIM6 | Level: 3 |
The SET LAPD MODE=NONAUTOMATIC command did not change the LAPD mode from automatic to
PCR: 03474 | Module: FIREWALL | Level: 3 |
The SMTP proxy did not correctly allow outgoing (private to public) SMTP sessions when the DIRECTION parameter was set to OUT or BOTH in the ADD FIREWALL PROXY command. This issue has been resolved.
PCR: 03475 | Module: NTP | Level: 3 |
The PURGE NTP command did not change the UTC offset to the initialised value. This issue has been resolved.
PCR: 03476 | Module: IPV6 | Level: 3 |
RIPng was showing routes to interfaces that were DOWN as being UP. This issue has been resolved.
PCR: 03478 | Module: PIM, PIM6 | Level: 3 |
The message format for
PCR: 03484 | Module: FIREWALL | Level: 3 |
The firewall was not denying an ICMP packet, even if ICMP Forwarding was disabled when using Standard NAT. This issue has been resolved.
PCR: 03492 Module: HTTP, LOAD | Level: 2 |
Some memory loss occurred when loading a file via HTTP. This issue has been resolved.
PCR: 03494 | Module: BGP, FIREWALL | Level: 2 |
If the firewall was enabled when BGP was in use outgoing BGP data packets would have IP header errors and incorrect checksums. This problem has now been fixed.
PCR: 03497 | Module: PIM, PIM6 | Level: 2 |
In a network with an alternative path, if the link connected to the interface where a Candidate Rendezvous Point (CRP) advertised its RP candidacy was down, the CRP did not
PCR: 03498 | Module: SWI | Level: 3 |
The SHOW SWITCH FDB command showed a number of irrelevant entries.
This issue has been resolved.
Patch
