20Patch Release Note
PCR: 03372 | Module: IPG | Level: 3 |
When a Rapieri Series Switch was using layer 3 multicast protocols, IGMP group members on the upstream interface for the multicast stream would always be forwarded to, even if they left the group. This issue has been resolved.
PCR: 03373 | Module: HTTP | Level: 3 |
The HTTP proxy server terminated a session when uploading a large file.
This issue has been resolved.
PCR: 03375 | Module: IPG | Level: 2 |
The following issues with IPv6 have been resolved:
•Incorrect default values were set for the PREFERRED and VALID parameters in the ADD IPV6 PPFEFIX command. The correct default for PREFERRED is 604800 seconds (7 days), and the correct default for VALID is 2592000 seconds (30 days).
•The PREFERRED and VALID parameters in the ADD IPV6 PPFEFIX and SET IPV6 PREFIX commands were accepting values that could make the preferred life time longer than the valid life time.
•The POISONREVERSE parameter in the ADD IPV6 RIP command was not added to the automatic configuration.
PCR: 03379 | Module: IPSEC | Level: 3 |
If IPsec was using PPPoE, the initiator continued to keep the IPsec SA even if the PPPoE session failed and the ISAKMP Heartbeat timer expired. This issue has been resolved.
PCR: 03387 | Module: PIM, PIM6 | Level: 2 |
A memory leak occurred in IP or IPV6 if
PCR: 03388 Module: DHCP | Level: 3 |
The DHCP lease Expiry time showed incorrectly in the SHOW DHCP CLIENT command when the lease straddled across multiple months and years. This issue has been resolved.
PCR: 03393 | Module: ISAKMP | Level: 3 |
The allowable UDPPORT range has been changed from
PCR: 03397 | Module: SWI | Level: 3 |
The SHOW SWITCH FDB command output was incorrect when using the
Protected VLAN feature. This issue has been resolved.
Patch