Alloy Computer Products 16/24 gigabit web managed switch, GSS-16T4SFP, GSS-24T4SFP - page 38

GSS Series User Manual
3.2.11.2 Quality of Service – DSCP
Fig. 3.22
QoS Mode: Used to set the required QoS method. Options are 802.1p and DSCP.
Prioritise Traffic: Used to set the priority of each 3 bit value. Priority values range from 0
through to 7. A high, Medium, Normal or Low class can be applied to
each 3 bit priority value.
Port Number: Select the desired port to configure.
DSCP Value
(0 – 63): Used to apply a particular priority class to a certain DSCP value. Only 7
DSCP Values can have a priority class assigned to it. All other DSCP
values will be assigned the same priority class.
Priority: Set a High, Medium, Normal or Low priority class to 7 DSCP values. You
can then set a priority class to all other DSCP values.
Apply Button: The Apply button must be pressed after making any changes to any of
the values on this screen.
Cancel Button: By pressing the cancel button, you will discard any changes that you
have made.
Alloy Computer Products Pty Ltd Copyright ©2007
38