Alloy Computer Products 16/24 gigabit web managed switch, GSS-16T4SFP, GSS-24T4SFP 3.2.13 Rate Limit

GSS Series User Manual
3.2.13 Rate Limit
The Rate Limit function of the GSS Series is used to limit the speed of each port on the
switch.
Fig. 3.24
Traffic Rate Unit: Is used to select the incremental value of the rate limit. You can set a rate
limit based on 128K, 512K, 1M, 10M or 32M. If you select 128K you can
then select a rate value for each port. If the rate value is set to 1, the port
will be limited to 128K. If the rate limit is set to 2 then the port will be
limited to 256K.
Ingress: Select the ingress rate value from the drop down box provided. As stated
above the rate limit value is multiplied by the Traffic rate unit to give you
the total ingress speed.
Egress: Select the egress rate value from the drop down box provided. As stated
above the rate limit value is multiplied by the Traffic rate unit to give you
the total ingress speed.
Apply Button: The Apply button must be pressed after making any changes to any of
the values on this screen.
Refresh Button: Used to refresh the current settings displayed on the screen.
Alloy Computer Products Pty Ltd Copyright ©2007
40