Alloy Computer Products 16/24 gigabit web managed switch, GSS-16T4SFP, GSS-24T4SFP 3.2.15 SNMP

GSS Series User Manual
3.2.15 SNMP
Fig. 3.26
SNMP Enabled: Used to enable or disable SNMP.
SNMP Trap
Destination: Enter the IP address of a device used to receive SNMP Traps.
SNMP Get
Community: Enter the SNMP Get community name in the space provided.
SNMP Set
Community: Enter the SNMP Set community name in the space provided.
SNMP Trap
Community: Enter the SNMP Trap community name in the space provided.
Cold Boot: Tick this check box for an SNMP trap to be sent when the event occurs.
Warm Boot: Tick this check box for an SNMP trap to be sent when the event occurs.
Link Up: Tick this check box for an SNMP trap to be sent when the event occurs.
Link Down: Tick this check box for an SNMP trap to be sent when the event occurs.
Refresh Button: Used to refresh the current settings displayed on the screen.
Apply Button: The Apply button must be pressed after making any changes to any of
the values on this screen.
Alloy Computer Products Pty Ltd Copyright ©2007
42