Setting the VISUALIZER Mode Display
Select this display when displaying the source names of VISUALIZER on the VISUAL selection screen.
Note that this setting is enabled only when the optional expansion box
Setting item: VISUALIZER
Setting contents: OFF / ON
OFF: “VISUALIZER” and source names are not displayed on the VISUAL selection screen.
ON: “VISUALIZER” and source names are displayed on the VISUAL selection screen.
•Switching on or off cannot be done if ON is set in “Setting the Visual Effect” (page 26).
Setting the AUX Mode
Setting item: AUX
Setting content: OFF / ON
OFF: AUX source is not displayed.
ON: AUX source is displayed.
•OFF is not displayed when the optional DVD player or DVD changer is connected.
•When OFF is selected, the settings related to AUX cannot be changed from this unit.
•When either a DVD player or DVD changer compatible with
•AUX IN 2,3 is displayed when the external expansion box (VPE- S431) is connected.
Naming External Devices
When more than one external device is connected, you can name each (up to 3) as you like. After setting to ON in “Setting the AUX Mode,” touch any one of the [ 
] buttons of AUX IN 1 through 3, then this setting may be carried out.
Setting items: NAME
Setting contents: AUX / VCR /
•The selected source name is displayed instead of AUX source name. When a source is selected, the Function Guide of AUX mode appears.
•Only AUX
This setting is recomended if you view the navigation screen on the rear monitor. However, it is available only when the Alpine navigation system (except RGB navigation) is connected.
•Only when an Alpine TV tuner is connected, can you operate the displayed function guide from this unit.
*“EXT.DVD” is displayed on the source selection screen when a DVD player is connected, and
Adjusting the External Input Audio Level
After setting to ON in “Setting the AUX Mode,” touch any one of the [ 
] buttons of AUX IN 1 through 3, then this setting may be carried out.
Setting item: LEVEL
Setting content: LOW / HIGH
LOW: Decreases the external input audio level
HIGH: Increases the external input audio level
Setting of the External Monitor Output
Set it to ON when you use the rear entertainment function (page 25).
Setting items: MONITOR OUT-1, 2
Setting contents: OFF / ON
ON: By setting the connected external monitor to ON, the remote control will be usable.
OFF: When either MONITOR OUT 1 or 2 is set to OFF, only one monitor can be set by the rear enter function. When both MONITOR OUT 1 and 2 are set to OFF, REAR SELECT, which is displayed on the SYSTEM selection screen, cannot be used.
•The setting to “MONITOR
•Switching on or off cannot be done if ON is set in “Setting the Visual Effect” (page 26).
Setting of the Rear Camera
When the rear camera is connected, rear pictures are output on the screen.
Setting item: CAMERA IN
Setting contents: OFF / ON
ON: Even if the shift lever is not set to reverse (R), the rear pictures are output by selecting the CAMERA source.
OFF: The CAMERA source is not displayed on the VISUAL selection screen.
•By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
•To apply the setting, set to VISUAL “Setting the VISUAL Touch Button” (page 34).
Setting the VISUAL Touch Button
Setting item: VISUAL KEY
Setting content: VISUAL / NAV.
NAV.: Switches directly to the navigation screen by touching [VISUAL]. (Only when an Alpine optional RGB Navigation is connected.)
VISUAL: Recalls the VISUAL Select screen by touching [VISUAL].
