Antenna Extension Cable
Digital Output Terminal (Optical)
Use when combining fiber digital input compatible products.
Power Supply Connector
DC/DC Converter
•Do not install the converter at a location subjected to water such as under the floor mat or air conditioner. This may cause a malfunction.
•Do not bundle the DC/DC converter cable with other audio cables. Also, do not install the cables directly next to the unit. Doing so may induce noise into your system.
•Keep the DC/DC converter away from the Antenna cables and the rear side of the unit, otherwise noise may be generated when receiving radio broadcast.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s battery.
Fuse Holder (10A)
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control.
Remote Control Input Lead (White/Brown)
Connect the external Alpine product to the remote control output lead.
Reverse Lead (Orange/White)
Use only when a
Switches the video picture to the
Monitor Control Lead (White/Pink)
Connect this to the Monitor Control Lead of the touch panel- compatible rear monitor.
Monitor Extension Cable (Included)
Remote IN/OUT Terminal
Display Output Terminal
System Switch
When connecting an equalizer or divider using
•Be sure to turn the power off to the unit before changing the switch position.
Antenna Receptacle
AUX Input Terminals/AUX Output Terminals
If these terminals are connected to the optional expansion box
AV Select Connector
When this connector is connected to the optional expansion box
Ext. Output Connector
If this connector is connected to the optional Amplifier Link compatible monaural Amplifier, connect this to the optional Amplifier Link Box, and output the Amplifier Link control signal.
Ai-NET Connector
Connect this to the output or input connector of other product (CD changer, Equalizer, iPod adapter*, etc.) equipped with
*If you connect to iPod, you need the optional adapter
Front input/output Terminal
Use when connecting an amplifier or Equalizer.
Rear input/output Terminal
Use when connecting an amplifier or Equalizer.
Subwoofer output Terminal
Connect the input lead of an amplifier for the subwoofer to this terminal.
Remote
Connect this lead to the remote
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna, if applicable.
Audio Interrupt In Lead (Pink/Black)
Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking brake switch to transmit the parking brake status signals to the
Foot Brake Lead (Yellow/Black)
Connect to the vehicle's foot brake lead or brake lamp lead.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position.
Fuse Holder (10A)
Right Front (+) Speaker Output Lead (Gray) Right Front
Left Rear (+) Speaker Output Lead (Green)
Left Rear
Remote Control Interface Connector
Connect to the remote control interface box.