5.1ms 
0.5m
2.25m
Phase Switching
1 Make sure that the defeat is turned off (page
The SETUP selection screen is displayed.
3 Touch
The
4 Touch [
] of A.PROCESSOR.
The A.PROC list screen is displayed.
5 Touch [
] of PHASE.
The sound is uneven because the distance between the listening position and the different speakers is different. The difference in the distance between the front left and rear right speakers is 1.75 meters
Time correction eliminates the difference between the time required for the sound from the different speakers to reach the listening position. Setting the time correction of the front left speaker to 5.1 ms makes it possible to coordinate the distance from the listening position to the speaker.
The PHASE adjustment screen appears.
6 Switch the phase (0° or 180°) by touching [
] or [
] of the desired speaker.
7 Touch [RETURN] to return to the previous screen.
Graphic Equalizer Adjustments
The graphic equalizer allows you to modify the sound using 31 bands each for the front (left and right), rear (left and right) and center
5 Touch [SETUP] on the main source screen. The SETUP selection screen appears.
6 Touch
The
7 Touch [
] of A.PROCESSOR. The A.PROC list screen is displayed.
8 Touch [
] or [
] of T.CORR.
Select L/R or L+R.
L/R: Different adjustment values can be set for the left and right channels.
L+R: Sets the same adjustment values for the left and right channels.
9 Touch [
] of T.CORR.
The T.CORR adjustment screen appears.
10 Adjust the time correction value (0.0 ~ 20.0ms) of a desired speaker by touching the respective [
] or [
] button. (1 step = 0.05ms)
11 Touch [RETURN] to return to the previous screen.
•When the speaker is set to the “OFF” mode, the TCR for that speaker cannot be set. Refer to “Setting the Speakers” (page 46).
•The adjustment value for FRONT2 (Speakers) which is adjusted in time correction, is also applied to the front speakers in “Setting Bass Focus” (page 50).
•The adjustment (AUTO TCR) cannot be automatically set on this unit.
speakers. An additional 10 bands are available for the subwoofer. This allows you to customize the sound to suit your taste.
1 Check that the Defeat mode is off.
2 Touch [SETUP] on the main source screen.
The SETUP selection screen appears.
3 Touch
The
4 Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
5 Select L/R or L+R by touching [
] or [
] of G-EQ.
L/R: Different adjustment values can be set for the left and right channels.
L+R: Sets the same adjustment values for the left and right channels.
When parametric EQ is adjusted, this setting will be turned off.
6 Touch [
] of
The
7 Touch [
] of the desired speaker (channel).
The
8 Adjust the
