Installing the Tuner Box
Caution
Do not block the unit’s fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire.
Air ventilation hole
<Side of the tuner box>
When mounting with Velcro fasteners
When mounting the tuner with the Velcro fasteners, be sure to choose a flat location.
Do not hang the unit from the bottom of the dashboard or rear deck with the Velcro fasteners.
1 Remove the Protective paper and attach two pieces of Velcro fastener to the bottom of the Tuner.
| Tuner Box |
| Protective paper |
| Velcro Fasteners |
Protective paper | (Included) |
2 Check the position, and then fix the Tuner to the floor carpet.
When mounting with Screws
When mounting the tuner with the screws, be sure to choose a flat location.
When making holes, be careful not to scratch any pipes or wires.
1 Connect the bracket to both the flanks of the tuner with the supplied pan screws (M4 ⋅ 8).
Tuner Box
Bracket (Included)
Pan screws (M4 ⋅ 8) (Included)
2 Install the tuner on the floor with the supplied flange- head tapping screws (M4 ⋅ 14).
Tuner Box
Installing the DC/DC Converter
Install the DC/DC Converter on the floor with the supplied
DC/DC Converter
