Alpine KD-R810, KD-A815 manual Preparing the remote controller RM-RK50

Preparing the remote controller (RM-RK50)

When you use the remote controller for the first time, pull out the insulation sheet.

Insulation sheet

If the effectiveness of the remote controller decreases, replace the battery.

Replacing the lithium coin battery

CR2025

Warning (to prevent accidents and damage):

•Do not install any battery other than CR2025 or its equivalent.

•Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time.

•Store the battery in a place where children cannot reach.

•Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire.

•Do not leave the battery with other metallic materials.

•Do not poke the battery with tweezers or similar tools.

•Wrap the battery with tape and insulate when throwing away or saving it.

Caution:

•Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

•Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.

This unit is equipped with the steering wheel remote control function.

Before operating, connect an exclusive remote adapter (not supplied) which matches your car to the steering wheel remote input terminal on the rear of the unit.

•For details, refer also to the instructions supplied with the remote adapter.

ENGLISH

5