Alpine KD-A815, KD-R810 manual Bluetooth device, Restored

Bluetooth

Symptom		Remedy/Cause
The unit does not detect the	• Search from the Bluetooth device again.
Bluetooth device.	• Reset the unit (	3), then search from the Bluetooth
	device again.
The unit does not make pairing	Enter the same PIN code for both the unit and target
with the Bluetooth device.	device.
Echo or noise occurs.	Adjust the microphone unit’s position.
Phone sound quality is poor.	• Reduce the distance between the unit and the
	Bluetooth mobile phone.
	• Move the car to a place where you can get a better
	signal reception.
The unit does not response	You may have tried to copy the same entries (as stored)
when you tried to copy the	to the unit. Press DISP or BACK to exit.
phonebook to the unit.
The sound is interrupted or	• Reduce the distance between the unit and the
skipped during playback of a	Bluetooth audio player.
Bluetooth audio player.	• Disconnect the device connected for Bluetooth
	Phone.
	• Turn off, then turn on the unit.
	• Connect the player again, when the sound is not yet
	restored.
The connected audio player	• Check whether the connected audio player supports
cannot be controlled.	AVRCP (Audio/Video Remote Control Profile).
	(Operations depend on the connected audio player.)
	• Disconnect and connect the Bluetooth player again.
“Voice Dial” is not successful.	• Use “Voice Dial” calling method in a more quiet
	environment.
	• Reduce the distance from the microphone when you
	speak the name.
	• Change the <NR/EC Mode> to <Off> (		20), then
	try again.

40

ENGLISH