Alpine KD-R810, KD-A815 manual Ring Color *2, Fad/Bal *3, *4 R6 F6, 62Hz/95Hz

Category

Color Setup

Audio

Menu item	Selectable setting, [ Initial: Underlined ]
Ring Color *2	• On	: When a call comes in, the display will flash in blue.
		• The display will change to the original color
		when the call is answered or the incoming call
		stops.
		When the unit receives a text message, the
		display only illuminate in blue.
	• Off	: Cancels.
Fad/Bal *3, *4	R6 – F6, [ 0 ]	: Fad (fader): Press 5/∞ to adjust the front and
Fader/balance		rear speaker output balance.
	L6 – R6, [ 0 ]	: Bal (balance): Press 4 / ¢ to adjust
		the left and right speaker output balance.
Loud	• Loud 1/2/3	: Boost low and high frequencies to produce a
Loudness		well-balanced sound at a low volume level.
	• Off	: Cancels.
Volume Adjust	Level –5 —	: Preset the volume adjustment level of each source
	Level +5,	(except FM), compared to the FM volume level.
	[ Level 0 ]	The volume level will automatically increase or
		decrease when you change the source.
		• Before making an adjustment, select the source
		you want to adjust.
		• “FIX” appears on the display if “FM” is selected as
		the source.
Subwoofer	• LPF	: Turn the control dial to select the cutoff
		frequency to the subwoofer.
		Off: All signals are sent to the subwoofer.
		LPF 55Hz/LPF 85Hz/LPF 120Hz: Frequencies
		higher than 55 Hz/85 Hz/120 Hz are cut off.
	• Level	: Turn the control dial to adjust the subwoofer
		output level. Level 00 to Level 08 [ Level 04 ]
	• Phase	: Turn the control dial to select the subwoofer
		phase. 0deg (normal) or 180deg (reverse)
HPF	Select the cutoff frequency to the front/rear speakers. Set this to
High Pass Filter	match the LPF settings.
	• 62Hz/95Hz/	: Frequencies lower than 62 Hz/95 Hz/135 Hz are
	135Hz	cut off.
	• Off	: All signals are sent to the front/rear speakers.

*2 Displayed only when USB Bluetooth adapter, KS-UBT1 is connected. *3 If you are using a two-speaker system, set the fader level to <0>.

*4 This adjustment will not affect the subwoofer output.

28

ENGLISH