Alpine KD-R810, KD-A815 manual Tracks

	Symptom		Remedy/Cause
	Noise is generated.	The track played back is not an MP3/WMA/WAV track.
		Skip to another file. (Do not add the extension code
		<.mp3>, <.wma>, or <.wav> to non-MP3/WMA/WAV
		tracks.)
	“Reading” keeps flashing on the	• Readout time varies depending on the USB device.
	display.	• Do not use too many hierarchy or folders.
		• Turn off the power then on again.
		• Do not pull out or connect the USB device repeatedly
			while “Reading” is displayed on the display.
	“Read Failed” appears on the	The connected USB device is not working properly.
	display.	Connect the USB device again.
	“No File” appears on the	Check whether the selected folder, the connected USB
playback	display.	device, or the iPod/iPhone contains a playable file.
	“Not Support” appears and	Check whether the track is a playable file format.
device	track skips.
	Tracks/folders are not played	The playback order is determined by the file name.
USB	back in the order you have	Folders with numbers on the initial of their names
	intended.	are sorted in numerical order. However, folders with
		no numbers on the initial of their names are sorted
		according to the file system of the USB device.
	• “No USB” appears on the	• Check whether the connected USB device or the iPod/
	display.		iPhone is compatible with this unit.
	• The unit cannot detect the	• The USB device is not connected properly. Connect
	USB device.		the USB device again.
	While playing a track, sound is	The tracks have not been properly copied into the USB
	sometimes interrupted.	device. Copy tracks again into the USB device, and try
		again.
	Correct characters are not	This unit can only display letters (capital: A – Z,
	displayed (e.g. album name).	small: a – z), numbers, and a limited number of symbols.
		(	9)

ENGLISH

39