Controls and Pushbuttons
There are several controls that you will frequently use when using the navigation system:
1.Power/Volume Control knob
2.Select Encoder
3.ENTER button
4.CANCEL button
5.NAV button
1
2
3 
4 
5
SYSTEM INTRODUCTION
The Power/Volume Control knob is used to turn the naviga- tion radio on and off and to adjust the volume of the naviga- tion voice command. To turn the navigation radio on or off, press the knob in. To raise or lower the volume of the voice guidance during a voice command, turn the knob to the left or right.
The Select Encoder and ENTER button work together to input route information. The Select Encoder is used to scroll through navigation menus and map icons. The ENTER button is used to input highlighted information into the system. When you highlight a menu or map item using the Select Encoder and press ENTER, the system will take you to the next screen.
The CANCEL button is similar to the back button on a com- puter. When pressed, CANCEL will return you to the previ- ous screen.
The NAV button allows you to access the Main Menu screen from anywhere in the navigation system.
9
