CD PLAYER OPERATION
NOTE: The ignition switch must be in the ON or ACC position and the radio power turned ON before the CD player will operate.
NOTE: If your vehicle is not equipped with the CD Changer option, you will not be able to use the Navigation system and the CD Player simulta- neously. Always remove the Navigation DVD before inserting another disc.
WARNING: Always check the CD player for discs be- fore inserting another disc. Failure to do so may 
cause damage to the system.
Inserting a CD
You may insert or eject a disc with the radio off. If the radio is on, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number and index time in minutes and seconds. Play will begin at the start of Track 1.
NOTE: The unit may take
Ejecting a CD
Press the EJT button. The disc will unload and the unit will
48
switch to the radio mode. If you do not remove the disc within 15 seconds, it will reload and begin to play. The disc can be ejected with the radio and ignition off.
Playing a CD
Once the CD is loaded, the Track screen will be displayed and the CD will begin to play.
To return to AM/FM mode, press the AM/FM button. This will halt CD operation. To return to CD mode, press the CD/ AUX button. The CD will resume from the point at which it was stopped.
Play Options
Press and hold the TUNE button to fast forward or rewind a track. To stop fast forward or rewind, release the TUNE button.
Press the top of the SEEK button to go to the next track on the CD. Press the bottom of the button to return to the begin- ning of the current track, or return to the beginning of the pre- vious track if the CD is within the first second of the current track.
