Setting the Source Name
3 Press ▲ or ▼ and select SOURCE NAME. |
The currently selected |
source name |
The currently selected |
source displays on |
Source Name menu |
Video Signal menu is |
for AUX1 only |
DVD: |
Source name of DVD can not be changed to other names.
AUX 1:
Press 
or 
to select
AUX 2:
Press 
or 
to select
Customizing Source Name
Your desired OSD source name can be defined up to 6 characters.
4Press 
or 
to select USER.
5Press ENTER key. Character setting menu appears.
6Press ▲, ▼, 
or 
and ENTER key to select the
character
“DEL”: | Delete one character at a time. |
“CLR”: | Clear entire characters. |
“OK”: | Confi rm source name and exit |
| from character setting menu. |
•If no key is pressed within 6 seconds, OSD disappears and the source name will not be changed.
Setting the Auto Level Control
Auto Level Control adjusts the sound volume automatically. This function balances sound volume for all sources.
3Press 
or 
to turn ON/OFF Auto Level Control. (Default: ON)
Setting the Screen Modes
Display mode on the screen can be adjusted to Wide, Cinema and Normal. (Default: WIDE)
3 Press | or | to select WIDE/CINEMA/NORMAL |
WIDE
Normal images are expanded uniformly in the horizontal direction and are displayed over the entire screen.
CINEMA
Normal images are expanded in the horizontal and vertical directions. The top and bottom of the image are cut off. This mode is suited for 16:9 cinema size images.
NORMAL
Normal image (4:3)
4Wait 6 seconds until OSD disappears; the adjustment will be saved automatically.
Setting the TV System
Broadcast TV System can be manually switched.
3Press 
or 
to select AUTO/NTSC/PAL. (Default: AUTO)
Setting the Video Signal
3Press 
or 
to select
Video Signal selection menu is only available in AUX1 source.
AUX1 must be connected with either Composite cable or
Refer to System Connection (Page 28)
| 4/8/06 2:17:28 | AM |
|
|
|
