Alpine PKG-RSE2 owner manual Custom Setup Operation, 23-EN, Setting the Video CD Play Mode

• Compressed audio is not supported on this Built-in DVD 10.2 inch overhead monitor, PKG-RSE2. Please do not change this setting.

Book_PKG-RSE2.indb 23

CD-DA:

Only CD data can be played back. The initial setting at the factory is CD DA.

CUSTOM SETUP items:

CD PLAY MODE / VCD PLAY MODE / PAUSE MODE / DOWNMIX MODE

4 Press ▲ or ▼ to change the setting item, then press ENTER.

5 Press DVD SETUP.

The settings are stored and the setup mode is deactivated.

• Press RETURN to return to the previous display.

• When settings are changed, old settings are overwritten. Make a note of the current settings before making changes. If the vehicle’s battery is disconnected, the settings will be cleared and will return to the factory settings.

Setting the CD Play Mode

The unit can be set to play only the audio data on discs containing music data.

Setting item: CD PLAY MODE

Setting contents: CD-DA / COMPRESSED AUDIO

Custom Setup

Operation

Custom Setup Operation

The following steps (1 through 5) are common to each of the mode settings. Once the mode is selected under the CUSTOM SETUP menu, refer to the section for that mode for details.

1Press DVD SETUP before inserting a disc, or when in stop mode.

The setup menu appears on the monitor.

Setting the Video CD Play Mode

When playing a Playback Control (PBC) enabled video CD, you can choose to set PBC ON or OFF.

Setting item: VCD PLAY MODE

Setting contents: PBC ON / PBC OFF

PBC ON: The PBC menu is displayed.

PBC OFF: The PBC menu is not displayed.

The initial setting at the factory is PBC ON.

Setting the Pause Mode

In pause mode, screen blurring may occur. To overcome this, set AUTO/FIELD/FRAME accordingly.

Setting item: PAUSE MODE

Setting contents: AUTO / FIELD / FRAME

If you experience blurring during pause mode, set to FIELD or

FRAME.

The initial setting at the factory is AUTO.

2Press ▲ or ▼ to select “CUSTOM SETUP,” then press ENTER.

3Press ▲ or ▼ to select your desired setting item, then press ENTER.

Setting the Downmix Mode

This function applies to Dolby Digital, DTS stream sound.

Setting item: DOWNMIX MODE

Setting contents: STEREO / SURROUND ENCODED

STEREO:Stereo Downmix

SURROUND ENCODED: Surround compatible Downmix The initial setting at the factory is

SURROUND ENCODED.

23-EN

4/8/06 2:17:35 AM