Alto-Shaam MN-29245 1010ESi, DIM ENS IONS H x W x D, Ins Ta Ll At Ion Requirem, Ents, 101 0 E S

10•10ESi

				30" (761mm)
	2-1/8" (53mm)				Water Drain	43-7/8" (1114mm)				34-1/16" (865mm)
	3-5/8" (92mm)				(Back)
						41-15/16" (1064mm)
										31-3/8" (796mm)
					VentSteam(Top)	(1538mm)9/16"	(192mm)9/16"-7	(861mm)15/16"-33	(1053mm)1/2"-41
15-3/4"	(400mm) 13-1/2"	(342mm)	11-1/8" (282mm)	Untreated Water						(158mm)1/4"-6
				Intake (Bottom)
				Treated Water
				Intake (Bottom)						Water Drain
				Electrical Connection (Bottom)
				2" (50mm)		60-

33-1/16" (840mm)

4-15/16"

(125mm)

7-9/16"

17-15/16"

46-7/8" (1190mm)

(191mm)

(456mm)

DIM ENS IONS : H x W x D

EXTERIOR :

INS TA LL AT ION REQUIREM

ENTS

41-1/2 " x 4 3-7/8" x 34-1 /16"

(1 053mm x 1114mm x 865mm)

Oven must be installed level.

EXTERIOR WITH RECESSE D DOOR :

(1053mm x 1216 mm x 865mm)

Hood installation is required.

41-1 /2" x 47-7/8" x 34-1 /16 "

Water supply shut-off valve and back-flow preventer.

INTERIOR: 27" x 23-1/2" x 21-1/ 16"

(685mm x 59 7mm x 5 35mm)

WATER REQUIREME NTS

WATE R Q UALI TY MI NIMUM STANDAR DS

TWO (2) COLD WATER INLETS - DRINKING QUALITY

USING A WATER SUPPLY NOT MEETING ALTO-SHAAM'S

ONE (1) TREATED WATER INLET:

3/4" NPT*

* Can manifold off

MINIMUM WATER QUALITY STANDARDS WILL VOID THIS

WARRANTY. It is the responsibility of the purchaser to ensure that

ONE (1) UNTREATED WATER INLET:

3/4" NPT*

of one 3/4" line.

incoming water supply is compliant with the specifications listed

LINE PRESSURE:

30 to 90 psi

2.8 to 6.2 bar

through adequate treatment measures. Installation of the

WATER DRAIN: 1-1/2"CONNECTION WITH A 2" MINIMUM AIR GAP

CombiGuard™ Water Filtration System is recommended, but this

INSTALLED AS CLOSE TO THE OVEN AS POSSIBLE

system may not address all water quality issues present.

Contaminant

Inlet Water Requirements (untreated water)

CLE AR ANCE REQ

UIRE ME NT S

Free Chlorine

Less than 0.1 ppm (mg/L)

Hardness

Less than 3 gpg (52 ppm)

LEFT : 6" (152mm)

RE COM MEN DED SERVICE ACCE SS : 18" (457mm)

Chloride

Less than 30 ppm (mg/L)

20" (508mm)

FROM HEAT PRO DUCIN G EQUI PMENT

Alkalinity

Less than 50 ppm (mg/L)

: 4" (102mm)

pH

7.0 to 8.5

RIGH T

TOP

: 20" (508mm)

FOR AIR MOVEMENT

Total Dissolved

Less than 12 ppm (mg/L)

: 4" (102mm)

Silica

BA CK

BOTT OM : 5 -1/ 8" (130 mm ) FOR LEGS

Solids (tds)

Less than 60 ppm

ELEC TR IC AL			(DE DICA TED CIR CU IT REQUI RED )
	VOLTAGE		PHASE	CYCLE/ HZ
240-	at 208		1*	60
-240 208	at 240		3	60
	at 208
-415 208	at 240		3	50
	at 380
380	at 415
440-480	at 440		3*	60
	at 480	* ELEC TRICAL SERVICE CHARGE APPLIES

	10•1 0 E S i		10•1 0 E S i/sk
AWG	AMPS	kW	AMPS	kW
2 Wire plus ground	67.0	13.9	69.2	14.4
AWG 3	77.0	18.4	79.0	18.9
3 Wire plus ground	38.6 /ph	13.9	40.0/ph	14.4
AWG 6	44.3 /ph	18.4	45.5/ph	18.9
4 Wire plus ground	21.1 /ph	13.9	22.0 /ph	14.4
AWG 10	25.6 /ph	18.4	26.3 /ph	18.9
3 Wire plus ground	20.0 /ph	15.4	21.0 /ph	15.9
AWG 8	22.0 /ph	18.4	23.0 /ph	18.9

WEIG HT				CAP ACIT Y
NET		385 lb	(175 kg )	FULL-SIZE PANS:	20" x 12" x 2-1/2"	Ten (10)	Eight (8)
				GN 1/1:	530 x 325 x 65mm	Ten (10)	Eight (8)
SHIP		495 lb	(225 kg )
				HALF-SIZE SHEET PANS:*	18" x 13" x 1"	Ten (10)	Nine (9)
CRATE DIM ENS IONS :			(L X W X H) EST
		53" X 45"	X 49"	ON WIRE SHELVES ONLY	120 lb (54 k g)	MAXI MUM
	(1346 x 1143 x 1245mm )			VOL UME MA XI MU M: 75 qu arts (95 lit ers)
				*AD DITIO NAL WIR E SHE LVE S REQ UIRE D FOR MAXIM UM CAPAC ITY

COMBITOUCH™ ES SERIES • ELECTRIC INSTALLATION MANUAL • 11 .