Alto-Shaam MN-29245 1010ES, DIM ENS IONS H x W x D, Ins Ta Ll At Ion Requirem, Ents, El Ectrica

10•10ES

				30" (761mm)
	2-1/8" (53mm)				Water Drain	43-7/8" (1114mm)				34-1/16" (865mm)
	3-5/8" (92mm)				(Back)
						41-15/16" (1064mm)
										31-3/8" (796mm)
					VentSteam(Top)	(1538mm)9/16"	(192mm)9/16"-7	(861mm)15/16"-33	(1053mm)1/2"-41
15-3/4"	(400mm) 13-1/2"	(342mm)	11-1/8" (282mm)	Untreated Water						(158mm)1/4"-6
				Intake (Bottom)
				Treated Water
				Intake (Bottom)						Water Drain
				Electrical Connection (Bottom)
				2" (50mm)		60-

33-1/16" (840mm)

4-15/16"

(125mm)

7-9/16"

17-15/16"

46-7/8" (1190mm)

(191mm)

(456mm)

DIM ENS IONS : H x W x D

EXTERIOR :

INS TA LL AT ION REQUIREM

ENTS

41-1 /2" x 43-7/8" x 34-1 /16 "

(1053mm x 1114mm x 865mm )

Oven must be installed level.

EXTERIOR WITH RECESSE D DOOR :

(1053mm x 1216 mm x 865mm)

Hood installation is required.

41-1 /2" x 47-7/8" x 34-1 /16 "

Water supply shut-off valve and back-flow preventer.

INTERIOR: 27" x 23-1/2" x 21-1 /16 "

(685mm x 597mm x 5 35mm)

WATER RE QUIREM ENT S

WATER QU AL ITY M INI MUM ST ND ARD S

TWO (2) COLD WATER INLETS - DRINKING QUALITY

USING A WATER SUPPLY NOT MEETING ALTO-SHAAM'S

ONE (1) TREATED WATER INLET:

3/4" NPT*

* Can manifold off

MINIMUM WATER QUALITY STANDARDS WILL VOID THIS

WARRANTY. It is the responsibility of the purchaser to ensure that

ONE (1) UNTREATED WATER INLET:

3/4" NPT*

of one 3/4" line.

incoming water supply is compliant with the specifications listed

LINE PRESSURE:

30 to 90 psi

2.8 to 6.2 bar

through adequate treatment measures. Installation of the

WATERDRAIN: 1-1/2"CONNECTION WITH A 2" MINIMUM AIR GAP

CombiGuard™ Water Filtration System is recommended, but this

INSTALLED AS CLOSE TO THE OVEN AS POSSIBLE

system may not address all water quality issues present.

Contaminant

Inlet Water Requirements (untreated water)

CLE ARANCE R EQ UIR EM ENT S

Free Chlorine

Less than 0.1 ppm (mg/L)

Hardness

Less than 3 gpg (52 ppm)

LE FT : 6" ( 152mm)

REC OM MENDE D SE RVI CE ACC ES S: 18" (457mm)

Chloride

Less than 30 ppm (mg/L)

20" ( 508mm)

FROM HEAT PRO DUCI NG EQUI PMENT

Alkalinity

Less than 50 ppm (mg/L)

: 4" ( 102mm)

pH

7.0 to 8.5

RIGHT

TOP

: 20" (508mm)

FOR AIR MOVEMENT

Total Dissolved

Less than 12 ppm (mg/L)

Silica

BACK : 4" ( 102mm)

BOTTOM

: 5 -1/ 8" (130 mm ) FOR LEGS

Solids (tds)

Less than 60 ppm

EL ECTRICA
	VOLTAGE
208-240	at 208
	at 240
208-240	at 208
	at 240
380-415	at 380
	at 415
440-480	at 440
	at 480

L (DED IC ATE D CIRC UI T RE QU IR ED )
PHASE	CYCLE/ HZ
1*	60

360

350

3*60

* ELECT RICAL SERVICE CHARGE APPLIES

AWG	AMPS	kW
2 Wire plus ground	67.0	13.9
AWG 3	77.0	18.4
3 Wire plus ground	38.5 /ph	13.9
AWG 6	44.0 /ph	18.4
4 Wire plus ground	21.5 /ph	13.9
AWG 10	25.6 /ph	18.4
3 Wire plus ground	20.0 /ph	15.4
AWG 8	22.0 /ph	18.4

WEIGHT				CAPA CIT Y
NET		385 lb	(175 kg)	FULL-SIZE PANS:	20" x 12" x 2-1/2"	Ten (10)
				GN 1/1:	530 x 325 x 65mm	Ten (10)
SHIP		525 lb	(238 kg)
				GN 2/1:	650 x 530 x 65mm	Five (5)
CRATE DIM ENSIONS : (L X W X H)				HALF-SIZE SHEET PANS:*	18" x 13" x 1"	Ten (10)
		53" X 45" X 49"		ON WIRE SHELVES ONLY	120 l b ( 54 k g) MAXI MU M
	(1346 x 1143 x 1245m m)			VOL UM E MA XI MU M: 75 quarts (95 liters)
				*ADD IT ION AL WIRE SHE LVES REQ UIRE D FO R MAX IMUM CAPAC ITY

COMBITOUCH™ ES SERIES • ELECTRIC INSTALLATION MANUAL • 10 .