KEYBOARD KEYS
ON/OFF & START/STOP
ON/OFF
START/STOP
PROGRAMMING KEYS
UP
DOWN
SELECT
ENTER
CYCLE KEYS
SOFT CYCLE
HARD CYCLE
SHOCK CYCLE
AUTOMATIC CYCLE
MANUAL CYCLE
UV LIGHT CYCLE
DEFROST CYCLE
HEAT PROBE CYCLE
KEY COMBINATIONS
¾Initial Programming state – to initially set the device
o With the display reading "OFF", press and hold 
(“START/STOP”) for 5 seconds
¾Cycles programming state – to initially set the cycles
o With the display reading "OFF", press 
(“ENTER”) for 1 second
¾Recipe name programming state – to enter recipe names
o With the display reading "OFF", press 
(“A”) for 10 seconds
¾Load default values state – to load the standard parameters
o With the display reading "OFF", press 
(”UP”) for 10 seconds
¾Clear events memory state – to clear obsolete data
o With the display reading "OFF", press 
+ 
(”UP”+”DOWN”) for 10 seconds
¾Ready To Go state – in order to start a cycle
O If the controller is not "OFF", press
“ON/OFF” once.
13
