y.To change to YES or NO, press 
or 
then
press 
.
INITIAL PROGRAMMING
PRINT DURING CYCLE
NO
NO Blinks
z.To change to YES or NO, press 
or 
then
press 
.
INITIAL PROGRAMMING
RECIPES?
NO
NO Blinks
aa.To change to YES or NO, press 
or 
then
press 
.
INITIAL PROGRAMMING
NAFEM COMMUNICATION
NO
NO Blinks
The display will show for 2 seconds:
Then the controller will go into “OFF” state.
INITIAL PROGRAMMING
COMPLETE
NOTE: During programming 
key can be used to return to the previous screen (except at the steps 1h, 1i and 3d, when it has different functions).
key is used to confirm the settings and advance to the next screen.
At any time, to bring the controller to “OFF” state, just pres the
(“ON/OFF”) button.
2. PROGRAMMING THE CYCLES
a. With the display reading "OFF", press 
.
OFF
b.Enter the password (see page 14), then press 
.
PARAM. PROGRAMMING
ENTER PASSWORD
***
AUTOMATIC SOFT CYCLE PARAMETERS PROGRAMMING
The LED for "A" will be "ON".
The LED'S for cycles will be blinking.
c.Press 
. The LED for "SOFT" will be steady "ON".
PARAM. PROGRAMMING
AUTOMATIC MODE
CHOOSE
PROGRAMMING CYCLE
17
