American Panel AP20BC175-2 user manual The high air alarm temperature should be left at

				AP20BC175-2 Manual
			INITIAL PROGRAMMING
g. To set the day, press	or	then press	SET DAY
			03			03(day)
.						Blinks
h. To set the hour, press	or	(be sure to	INITIAL PROGRAMMING
continue to press the buttons until the hour and "AM"			SET TIME
			10:25 AM		10(hours)
or "PM" show correctly) then press		.				Blinks

i.To set the minutes, press or then press

.

INITIAL PROGRAMMING

SET TIME 10:25 AM

25(minutes)

Blinks

INITIAL PROGRAMMING

j. To change the number of probes, press			or	AIR PROBES NUMBER?
					1 Blinks
				1
then press	.
The high air alarm temperature should be left at
140 oF. However, if a change is desired:				INITIAL PROGRAMMING
k. To change the temperature, press		or		HIGH AIR ALARM	140 Blinks
				140 °F
then press	.
The low air alarm temperature should be left at
-35oF. However, if a change is desired:				INITIAL PROGRAMMING
l. To change the temperature, press		or		LOW AIR ALARM	-5 Blinks
				-5 °F
then press	.
				INITIAL PROGRAMMING
m. To change the number of probes, press			or	FOOD PROBES NUMBER?
					4 Blinks
				4
then press	.
The high food alarm temperature should be left at
180 oF. However, to make a change:				INITIAL PROGRAMMING
n. To change the temperature, press		or		HIGH FOOD ALARM	180 Blinks
				180 °F
then press	.
The low food alarm temperature should be left at
35 oF. However, to make a change:				INITIAL PROGRAMMING
				SOFT & HARD
o. To change the temperature, press		or		LOW FOOD ALARM	35 Blinks
				35 °F
then press	.

15