American Panel AP20BC175-2 user manual Defrost Cycle Parameters Programming, then press

AP20BC175-2 Manual

l.To change the temperature, press or

then press .

PARAM. PROGRAMMING AUTOMATIC HARD CYCLE BREAKING TEMP

60 °F

60 Blinks

m. To change the temperature, press or

then press .

PARAM. PROGRAMMING AUTOMATIC HARD CYCLE LOW AIR TEMP PART 2 28 °F

28 Blinks

n.To change the temperature, press or

then press .

PARAM. PROGRAMMING AUTOMATIC HARD CYCLE HIGH AIR TEMP PART 2

35 °F

35 Blinks

o.To change the temperature, press or

then press .

PARAM. PROGRAMMING AUTOMATIC HARD CYCLE HARD FOOD TEMP.

40 °F

40 Blinks

			PARAM. PROGRAMMING
p. To change the temperature, press		or	AUTOMATIC HARD CYCLE
			HOLDING LOW TEMP.	35 Blinks
			35 °F
then press	.
q. To change the temperature, press		or	PARAM. PROGRAMMING
			AUTOMATIC HARD CYCLE	42 Blinks
			HOLDING HIGH TEMP.
then press	.		42 °F
The display will show:			PARAM. PROGRAMMING
			AUTOMATIC HARD CYCLE
			PROGRAMMING COMPLETE

DEFROST CYCLE PARAMETERS PROGRAMMING

After about 2 seconds the display will automatically change to:

The LED for "A" will be "ON".

The LED'S for cycles will be blinking.

r.Press the button. The LED for "DEFROST" will be steady "ON".

PARAM. PROGRAMMING

AUTOMATIC MODE

CHOOSE

PROGRAMMING CYCLE

The defrost type must be left AIR FLOW.

s.Press .

PARAM. PROGRAMMING

DEFROST CYCLE

CHOOSE TYPE

AIR FLOW

AIR FLOW

Blinks

19