American Panel AP24BC250-3 user manual Manual Shock Cycle Parameters Programming

AP24BC250-3, AP24BCF300-3, AP40BC350-3, AP40BCF450-3 Manual

tt.To change the temperature, press or

then press .

PARAM. PROGRAMMING MANUAL HARD CYCLE HOLDING LOW TEMP.

35 °F

35 Blinks

uu.To change the temperature, press or

then press .

PARAM. PROGRAMMING MANUAL HARD CYCLE HOLDING HIGH TEMP.

42 °F

42 Blinks

The display will show:

PARAM. PROGRAMMING MANUAL HARD CYCLE

PROGRAMMING COMPLETE

MANUAL SHOCK CYCLE PARAMETERS PROGRAMMING

After about 2 seconds the display will automatically change to:

The LED for "M" will be "ON".

The LED'S for cycles will be blinking.

vv.Press the button (for shock freezers only). The LED for "SHOCK" will be steady "ON".

PARAM. PROGRAMMING

MANUAL MODE

CHOOSE

PROGRAMMING CYCLE

ww.To change the temperature, press or

then press .

PARAM. PROGRAMMING MANUAL SHOCK CYCLE LOW AIR TEMPERATURE -25 °F

-25 Blinks

xx.To change the temperature, press or

then press .

PARAM. PROGRAMMING MANUAL SHOCK CYCLE HIGH AIR TEMPERATURE -15 °F

-15 Blinks

yy.To change the time, press or then

press .

PARAM. PROGRAMMING MANUAL SHOCK CYCLE TOTAL TIME

H 04:00 MIN

04:00 Blinks

zz.To change the temperature, press or

then press .

PARAM. PROGRAMMING MANUAL SHOCK CYCLE HOLDING LOW TEMP.

-4 °F

-4 Blinks

aaa.To change the temperature, press or

then press .

PARAM. PROGRAMMING MANUAL SHOCK CYCLE HOLDING HIGH TEMP.

3 °F

3 Blinks

24