American Panel AP24BC250-3 user manual Hard Chill Cycle, The display will show, alternating with

AP24BC250-3, AP24BCF300-3, AP40BC350-3, AP40BCF450-3 Manual

F INSTEAD OF AUTOMATIC you wish to select a MANUAL cycle, perform steps 1.a, 1.b, 1.c, 1.d,

1.e, 1f and 1.g (above), except in step 1.c press button instead of button . The LED for "MANUAL" will then be steady "ON". The readouts in those steps will be the same as before.

NOTE: Cycle time can be changed only in Cycle Programming mode. To change the programmed cycle time for any cycle see the instructions on Pages 17 to 25.

h. Press the ("START/STOP") button to start the cycle.

The display will show briefly:

STARTING CYCLE . . .

Then the display will show:

alternating with

03.07.2006		10:41 AM
AIR 1	75°F
		01:29
R / CHICKEN		140°F
Y / ROAST BEEF		143°F
B / CHICKEN		141°F
G / ROAST BEEF		142°F

01:29

Will count down

The MANUAL mode uses time and the air probe temperature to control the cycle.

The default total time for a soft cycle is 90 minutes. After the 90 minutes the unit will automatically go into holding mode.

The display will show:		03.07.2006		10:41 AM
		AIR 1	34°F
	alternating with			00:00
		R / CHICKEN		40°F
		Y / ROAST BEEF		40°F
		B / CHICKEN		40°F
		G / ROAST BEEF		40°F

00:00 Blinks

The operator can now end this cycle by pressing ("START/ STOP").

The display will show briefly:

STOPPING CYCLE . . .

Then the display will show:

OPERATING MODE

CHOOSE

OPERATING CYCLE

3. HARD CHILL CYCLE

28