American Panel AP24BC250-3 user manual Recipe Name Programming

AP24BC250-3, AP24BCF300-3, AP40BC350-3, AP40BCF450-3 Manual

The display will show:

After about 2 seconds the display will automatically change to:

PARAM. PROGRAMMING MANUAL SHOCK CYCLE

PROGRAMMING COMPLETE

PARAM. PROGRAMMING

MANUAL MODE

CHOOSE

PROGRAMMING CYCLE

NOTE: PROGRAMMING FOR "DEFROST", "UV" & "HEAT PROBE" WILL BE THE SAME IN MANUAL MODE AS IT IS IN AUTOMATIC MODE (see pages 20-22).

3. RECIPE NAME PROGRAMMING

				OFF
a. With the display reading "OFF", press the
button and hold it for 10 seconds.
b. Enter your password (see page 14), then press
				RECIPES PROGRAMMING
	.			ENTER PASSWORD
				***
c. Press	or	to change to the desired recipe		ENTER RECIPE NUMBER
				1	1 Blinks
				ENTER RECIPE NAME
number (from 1 to 150), then press			which will
move you to the "NAME" line.
d. Using	or	type the letters or numbers		ENTER RECIPE NUMBER
				1	_ Blinks
				ENTER RECIPE NAME
required, then press		. To confirm the recipe		CHICKEN_

and go to the next one press .

f a mistake is made in writing a recipe, use to go to

the desired location and correct it using or

. There is a blank space after number 9. It can be

used to add a space or delete a letter. Press when the recipe is corrected.

To finish the recipe name programming press (“ON/OFF”).

25