American Power Conversion manual Battery Replacement Procedure 2200 and 3000 VA models

10.4 Battery Replacement Procedure (2200 and 3000 VA models)

English

Note: Please read the cautions in section 10.1.

Battery replacement is a safe procedure, isolated from electrical hazards. You may leave the unit and loads on for the following procedure.

1.Grasp the top edge of the bottom front cover and tilt it out.

2.Unhook the bottom section of the front cover from the chassis and set it aside.

3.Use a flat-blade screwdriver or a coin to remove the two battery door screws and open the door.

4.Grasp the battery tray handle and pull the batteries part way out of the unit.

5.Press down on the side tabs of the first battery’s connector clips to release the connector.

6.Disconnect the battery leads by pulling the gray couplers apart.

21