20 |
|
|
| 20 |
| MasterSwitch 100V – User Guide |
| ||
|
|
|
|
|
|
|
|
|
|
Auto Power On
The Auto Power On selection allows the user to configure the receptacle to
1- With Master
2- 15 Sec After Master
3- 30 Sec After Master
4- 45 Sec After Master
5- 1 Min After Master
6- 2 Min After Master
7- 5 Min After Master
8- Never
<ENTER> Redisplay Menu
<ESC> Return To Previous Menu
Figure 7: Auto Power On Submenu
Select one of the settings. Selecting “With Master” indicates that
Master Outlet Configuration and Control
From the Outlets Manager submenu (see Figure 3), Option 9 allows the user to configure/control master settings to apply to all outlets whose Auto Power On settings are set to “With Master.” To perform an action on all outlets assigned to the master outlet, select Option 1 from the Outlets Manager submenu shown in Figure 3. The following submenu appears:
Master Outlet | |||
Outlet | Device Name | Auto Power On | Reboot Duration |
1:ON | Device 1 | With Master | Same as Master |
2:ON | Device 2 | With Master | Same as Master |
3:ON | Device 3 | With Master | Same as Master |
4:ON | Device 4 | With Master | Same as Master |
5:ON | Device 5 | With Master | Same as Master |
6:ON | Device 6 | With Master | Same as Master |
7:ON | Device 7 | With Master | Same as Master |
8:ON | Device 8 | With Master | Same as Master |
Master | PDU | Immediate | 5 Seconds |
1- Immediate All On
2- Immediate All Off
3- Sequence All On
4- Immediate Reboot
5- Sequenced Reboot
?- Help
<ENTER> Redisplay Menu
<ESC> Return To Previous Menu
