21MasterSwitch 100V – User Guide21
For configuration of the master outlet, select option 2 from the Outlets Manager submenu. The following submenu appears:
Outlet | Device Name | Auto Power On | Reboot Duration | |
1:ON | Device 1 |
| With Master | Same as Master |
2:ON | Device 2 |
| With Master | Same as Master |
3:ON | Device 3 |
| With Master | Same as Master |
4:ON | Device 4 |
| With Master | Same as Master |
5:ON | Device 5 |
| With Master | Same as Master |
6:ON | Device 6 |
| With Master | Same as Master |
7:ON | Device 7 |
| With Master | Same as Master |
8:ON | Device 8 |
| With Master | Same as Master |
Master | PDU |
| Immediate | 5 Seconds |
1- PDU Name |
| : Main PDU |
|
|
2- Auto Power On | : Immediate |
|
| |
3- Reboot Duration : 5 Seconds |
|
| ||
4- Accept Changes | : |
|
| |
?- Help |
|
|
|
|
<ENTER> Redisplay Menu |
|
|
| |
<ESC> Return To Previous Menu
Figure 9: Master Configuration Menu
Network Submenu
From the main menu, option 2 activates the Network submenu. From this submenu, the user may configure and the various networking parameters used by the MasterSwitch, use the ping utility to test network connections, and set access control parameters. Figure 10 shows the Network submenu.
1- TCP/IP
2- Ping Utility
3- Access Control
4- HTTP
5- Telnet
6- SNMP
<ENTER> Redisplay Menu
<ESC> Return To Previous Menu
Figure 10: Network Submenu
TCP/IP Submenu
The TCP/IP submenu allows the user to set network address parameters and enable or disable BOOTP. Note that MAC addresses are not changeable.
Note: Ensure that any changes made to network settings are correct. Incorrect settings are the most common reason for network communications problems!
