4 |
Table 4-5. Minor Error Codes for Major Error Codes 5H and 85H (Continued)
Error Status | Service Request Error Description |
(Hexadecimal) |
|
|
|
f705H/f785H | Required to log in to a task for service. |
|
|
f805H/f885H | Invalid task name referenced. |
|
|
f905H/f985H | Task address out of range. |
|
|
fc05H/fc85H | I/Oconfigurationisinvalid. |
|
|
fe05H/fe85H | No privilege for attempted operation. |
|
|
ff05H/ff85H | Service request has been aborted. |
Table
|
| Error Status | SRTP Error Description |
|
|
| (hexadecimal) |
|
|
|
|
|
|
|
|
| 0111H | Generic SRTP error. |
|
|
| 0211H | The PLC is inaccessible. |
|
|
| 0311H | Reserved. |
|
|
| 0411H | Unexpected SRTP version encountered in received message. |
|
|
|
|
|
|
|
| 0511H | UnrecognizedSRTPmessagereceived. |
|
|
|
|
|
|
|
| 0611H | Data present in SRTP message which should not contain data. |
|
|
| 0711H | Generic resource problem detected. |
|
|
| 0811H | SRTP message encountered in inappropriate connection state. |
|
|
| 0911H | Generic refusal by backplane driver to handle request. |
|
|
| 0a11H | Recognized but unsupported SRTPmessagereceived. |
|
|
| 0b11H | Lost transaction in server. |
|
|
| 1411H | Request failed due to an error in the remote device. The Remote |
|
|
|
| device log will have more information. |
|
|
| 2711H | Backplanedrivernotinitialized. |
|
|
| 2a11H | The backplane driver could not access the PLC. |
|
|
|
|
|
|
|
| 2b11H | Invalid binding on the message sent to the backplane driver. |
|
|
|
|
|
|
|
| 2c11H | The message could not be sent to its destination because the mailbox was |
|
|
|
| not open. |
|
|
| 2d11H | The maximum number of transfers to the destination is already |
|
|
|
| takingplace. |
|
|
| 2e11H | The maximum number of transfers of this transfer type is |
|
|
|
| alreadytakingplace. |
|
|
| 2f11H | Cannot obtain a backplane transfer buffer. |
|
|
| 3011H | Cannot obtain resources other than backplane transfer buffers. |
|
|
| 3111H | Connection ID or block transfer ID is not valid. |
|
|
| 3211H | Timed out waiting for PLC CPU response. |
|
|
| 3311H | The PLC CPU aborted the request. |
|
|
| 3411H | An invalid message type was specified. |
|
|
| 3511H | The specified task is not registered. |
|
|
| 3611H | Themailbox offset specified is invalid. |
|
|
| 3a11H | More than the allowable byte length in a single transfer. |
|
|
| 3b11H | Bad sequence number in the request. |
|
|
| 3c11H | Invalid command in request. |
|
|
| 3f11H | Request failed due to error on remote device, most likely running out of Dual- |
|
|
|
| Port RAM text buffers. |
|
|
|
|
|
|
TCP/IP Ethernet Communications User's Manual ± January 1996 |
| |||
