GE GFK-1004B user manual = Closed = Listen = SYN-SENT = SYN-RECEIVED = Established

6

Table 6-10. Exception Log Event Codes - Continued

Log Event

Code

Event ª12º TCP events (Continued)

Possible Cause and Resolution

fªConnection to remote node failed; resumingº

This error is reported when an RST has been received. If the errorpersists, verify that applications are using proper IP addresses and that the remote host is not experiencing resource limitations. Entry 3 is the endpoint (TCP connection identifier). Entry 4 is the TCP state:

1 = CLOSED

2 = LISTEN

3 = SYN-SENT

4 = SYN-RECEIVED

5 = ESTABLISHED

6 = FIN-WAIT-1

7 = FIN-WAIT-2

8 = CLOSE-WAIT

9 = LAST-ACK

10 = CLOSING

11 = TIME-WAIT

Entry 5 contains TCP flags.

10ªConnection to remote node failed; resumingº

This error is reported when a TCP connection has been aborted. The TCP layer has retransmitted a segment the maximum number of times and the remote host has failed to ACK the segment. Check network connectivity and the remote host's operational status. Entry 3 is the endpoint (TCP connection identifier). Entry 4 is the number of retransmissions.

11ªConnection to remote node failed; resumingº

This error is reported when a connection has been aborted after the remote host failed to respond to ªkeep-aliveº probes. Check network connectivity and the remote host's operational status. Entry 3 is the endpoint (TCP connection identifier). Entry 4 is the TCP state as shown above. Entry 5 is alwayszero.

12ªConnection to remote node failed; resumingº

This error is reported when an SYN has arrived in an improper state. If the error persists, verify that applications are using proper IP addresses and that the remote host is not experiencingresourcelimitations.

13ªLANsystem-softwarefault;resumingº

14ªLANPROM/softwaremistmatch;running soft Sw utilº

Trouble encountered initializing TCB. Entry 3 is the endpoint (TCP connectionidentifier).

15ªLANPROM/softwaremistmatch;running soft Sw utilº

Trouble encountered sending SYN. Entry 3 is the endpoint (TCP connection identifier). Entry 4 is a developer-significanterror code.

16ªLANPROM/softwaremistmatch;running soft Sw utilº

Deallocating TCB before close. Entry 3 is the endpoint (TCP connection identifier). Entry 4 is the TCP state as shown above.

17ªConnection to remote node failed; resumingº

Sent RST in state processing due to clash in packet fields and their expected values in this state. Entry 3 is the local endpoint, Entry 4 is the state, and Entry 5 is the value of the code field of the offending packet.

GFK-1004B Chapter 6 Troubleshooting 6-23