![](/images/new-backgrounds/1187338/187338473x1.webp)
D |
SMC EtherCard PLUS, EtherCard PLUS Elite 16, EtherCard PLUS/A
\CONFIG.SYS
FILES=20
BUFFERS=48
DEVICE=\DOS\HIMEM.SYS DEVICE=\DOS\EMM386.EXE RAM 1024 DOS=HIGH,UMB DEVICE=\GEFNDIS\PROTMAN.DOS /I:\GEFNDIS rem
rem The Ethernet Adapter and its device driver must first be installed rem into your computer. Replace the string ª<DIRECTORY>º in the
rem following DEVICEHIGH command with the directory which contains rem the specified device driver for your Ethernet Adapter module. rem
DEVICEHIGH=\<DIRECTORY>\SMCMAC.DOS
DEVICEHIGH=\GEFNDIS\GEFNDIS.DOS
\AUTOEXEC.BAT
SET GSMCFG=C:\GSM\CFILES
rem Bind NDIS Drivers \GEFNDIS\netbind
\GEFNDIS\PROTOCOL.INI
[protocol manager]
DRIVERNAME = PROTMAN$
[GEFNDIS]
DRIVERNAME = GEFNDIS$
BINDINGS = SMCMAC_NIF
MAX_RX_SIZE = 560
NUM_RX_BUFS = 8
; Caution: | Interrupt conflicts may arise when using default hardware |
;configurations for many Ethernet Adapters. For example,
;interrupt IRQ3 is commonly used for the COM2 serial port
;and most Ethernet adapters.
;
;The following information must match the hardware configuration
;of the Ethernet Adapter as installed on your computer. Please
;modify this information as necessary.
[SMCMAC_NIF]
DRIVERNAME = SMCMAC$ irq = 3 ramaddress = 0xd000
| iobase = 0x280 |
|
|
| receivebufsize | = 1024 |
|
TCP/IP Ethernet Communications User's Manual ± January 1996 |