4.3 Routing Of Cables
4.3.1Input cables
One or more of the top 3 knockouts (top left hand side knockout and 2 actually in the rear cover) must be used for entry of the input AC cable. This is essential if the input cabling used is not double insulated and recommended as this optimises the EMC performance by ensuring the AC Input cables are as far away from the output wiring as possible. Cables should be routed as near the top of the system as possible using the cable clips provided, with big loops of cable inside the shelf being avoided.
300mm of cable protector grommet strip supplied. Simply cut into required lengths and fit around edge of knockout holes (as shown below)
Top 3 Knockouts
Cable protector grommet
AC Input Cable
Note/ This picture does not show a 40A Shelf and is to be used only as an example of how to use the grommet strip as cable protection.
User Manual | Page 37 of 44 | 18th FEB 02 |
DC MX06 40A Shelf |
